12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER
by people ...
Product Specifications
- Toggle anchor installs behind 3⁄8”- to 3-5⁄8”-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
- Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
- Made in USA, and includes 1⁄4”-20 UNC-threaded bolts
- Ultimate tensile strength is 265 lb. in 1⁄2” drywall and 1,080 lb. in concrete block with a 1⁄4”-20 UNC bolt (included)
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Product Description
Mount anything! The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3⁄8” to 3-5⁄8” thick including gypsum board, drywall, and concrete block, includes 1⁄4”-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1⁄4”-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1⁄2”. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1⁄2” drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Product Reviews
Work great, but order more than you need.
Used these to mount a VideoSecu Mounts for a 60” Samsung TV on metal studs with 24” between studs. They worked great, when they worked. I used 8 (one in each corner, plus four more in the drywall only), probably more than I needed, but heck, I had 12 pieces and nothing better to do with them. I only ended up with two leftover because one came broken and another one didn’t tighten in the wall. I ended up just pushing that one through and letting it fall in the wall to install another one. All that being said, they work great, TV is still up.
Perfect for mounting my flatscreen!
These work great. I did have a little issue getting them to fit easily into my 1⁄2 drilled hole, but that was probably due to the metal backing which I drilled through being able to move back and forth. I used four to secure my articulating wall mount for my 55” TV and they work great. Definitely worth the price.
use a wood drill bit not a metal bit it is worlds better. and yes the Toggle works great in PLASTER …
My family is ruff on child gates! We ripped it right out of the Plaster wall. make sure if your drilling into a plaster wall, use a wood drill bit not a metal bit it is worlds better.and yes the Toggle works great in PLASTER walls too. I”m actually looking for something to fix, crazy!
SOLID!!
These worked so much better than expected. Hung my 24” LCD on its super extendo arm from the drywall (one is in a metal stud, using this also) here in our office suite - SOLID. VERY satisfied.
The only thing to keep in mind is that the hole they make is definitely pretty big - about a half-inch if you have to …
These things are everything other reviewers say they are, and more. I won’t use any other kind of anchor now for mounting anything heavier than a few pounds. The only thing to keep in mind is that the hole they make is definitely pretty big - about a half-inch if you have to remove them later. If you can hit a stud with a screw, it’s still better to do that over any kind of drywall anchor…
Solid
The best anchors I ever used.
Strong anchors
Worked great to hold my tv up in a plaster and lath wall.
… sonos soundbar mount to the wall and was so easy to install
Used these to anchor a sonos soundbar mount to the wall and was so easy to install!. Our home is a little older so the wall is a little thicker than typical drywall today (gypsum board plus plaster) - these were the perfect solution. I wish I had thought of this before mounting our flatscreen this would have made it much easier for that as well.
great product.
Just what I was looking for…great product.
One Star
The plastics on unit is. Very cheap
Recommended
Almost as good as Hilti, at a fraction of the cost
One Star
Did not
Toggler
Great product!
Four Stars
Work as advertised.
This i s now my “GO TO” wall fastener!
This is the first time i have used these snap toggles and i am sold on them! I mount a lot of TV’s on various wall surfaces and this is a great all purpose solution that is…
Many broke, you’ll need more than budgeted
Needed all 12 and unfortunately they’re extremely fragile. Not sure if they arrive defective or became fragile upon use but 4 out 12 broke for the same problem.
Five Stars
Easy to use.
Good toggles. I used them to hang a bracket …
comments powered by DisqusGood toggles. I used them to hang a bracket for flat screen tv. Make sure that both plastic pieces are leveled against each other when fastening the top section ( that one is not…
