Cheetah Mounts APDAM3B Dual Articulating Arm TV Wall Mount Bracket for 20-65” TVs up to VESA 400 and 115lbs, Mounts to Two 16" studs and includes a Twisted Veins 10’ HDMI Cable and a 6” 3-Axis Magnetic Bubble Level

by people ...

Product Specifications

Fits 20-65” TVs with Hole Patterns up to VESA 400x400mm (16x16”) and up to 115lbs
14” Extension yet only 2.7” when Collapsed, 130° Swivel and 10° Tilt
Allows for 3° Rotation Adjustment to Level after Installation
Mounts to 16” Wooden Studs as well as All Masonry
Includes a 10’ Twisted Veins HDMI Cable, and a 6” 3 Axis Magnetic Bubble Level

Product Description

FITS 20-65” TV’s up to VESA 400 and 115LBS This mount fits virtually all 20-65” TVs sold today with VESA hole patterns from 50x50mm (2x2”) to 400x400mm (16x16”) and up to 115lbs.

14” EXTENSION, LOW 2.7” PROFILE, 130° SWIVEL, 10° TILT The articulating arm extends up to 14” from the wall yet collapses to 2.7”. The mount allows for up to 130° swivel and 10° tilt.

ALLOWS 3° ROTATION ADJUSTMENT TO LEVEL AFTER INSTALLATION Slots in the TV plate allow for 3° of rotation adjustment to level the display after mounting.

MOUNTS TO TWO 16” WOODEN STUDS AS WELL AS ALL MASONRY The APDAM3B can be mounted to Two standard 16” Wooden studs as well as all types of masonry. All mounting hardware is included.

10’ TWISTED VEINS HDMI CABLE AND 6” MAGNETIC BUBBLE LEVEL The mount includes a 10’ Twisted Veins High Speed with Ethernet HDMI cable featuring 4K 60HZ 3D signal support and a protective braided jacket. A 6” 3-axis Magnetic Bubble Level ensures level mounting.

INCLUDES ALL NECESSARY MOUNTING HARDWARE This mount ships with hardware for both wall and TV mounting.

LIFETIME 100% GUARANTEE All our mounts come with a lifetime guarantee. If you experience ANY issues, please contact us.

Product Reviews

Tilts forward on 65’ TV

We installed this mount with a 65 inch Vizio and no matter what it tilted forward. We fixed by inserting a pencil between the tv and the bottom of the bracket on each side.

An OK TV mount but I feel there are better options on the market

Black, TV wall mount bracket with articulating arms. This product accommodates most 20” - 65” TVs and holds up to 115 lbs. The mount allows for up to a 130° swivel and 10° tilt, and the arm can extend up to 14” from the wall and is ~3” when collapsed. The mount also comes with a 10’ HDMI cable, 6” 3 axis magnetic bubble level, and all mounting hardware.We use this mount with our 42” TV. Installation is not too difficult but does require the use of tools. I like that this product is very sturdy and stable. However, this mount doesn’t have a very low profile and juts out from the wall a bit. It is also difficult to clean and get into all of the mount’s nooks and crevices. I also have difficulty pushing the mount back into place (flush with the wall) after having the arms extended forward, as one arm (or the other) tends to inevitably go to the left or right instead of straight and center. In addition, as others have mentioned, the mount does make the TV tip forward slightly - doesn’t bother us too much, but the degree of tilt may be more drastic with larger and/or heavier TVs.An OK TV mount but I feel there are better options on the market.

Strong Mount

Upon receiving the two mounts, I noticed that it came with a lot more than I thought. There are quite a bit of extra TV screws, small level, LED keychain light, braided HDMI cord, and velcro ties. The mount itself feels very strong and sturdy; although many people say it’s hard to pull/turn the mount, it isn’t hard to do once the tv is mounted to it.I ordered this mount without measuring my studs, and was disappointed in finding out that my studs were 24” apart. Luckily, we had enough SnapToggles to do the job (each hold about 250lbs) and it turned out great.It does have the slight tilt, but I’m using its max size TV at 65” so I was ready for it to do it.The one complaint I do have is the “safety screws” or set screws that hold the tv onto the mount, aren’t in the best location for a 65”, as they are right on the outer screw heads.

Kit was nicely packaged and so far so good

Half the price of competitors products at local shops in the area. Kit was nicely packaged and so far so good. I gave it 4 stars just because I wish the brackets that that rest on the actual wall mount, They are made off thin flimsy stamped metal that can be easily bent. I almost returned it for that reason but really wanted to get the TV mounted so gave it a shot. Seems to hold up fine and I don’t ever move the TV anyways. I do like the fact that this came with a nice braided HDMI cable as well as a level to aid in mounting.

Nice Inexpensive Mount

I have a 55” Sony Bravia LED TV that has a Gorilla Glass front. Since the glass is very strong the TV does not require a frame. This allows the TV to be very thin. The front and the back of the TV are also completely flat. My existing mount is stationary and does not have any tilt, swivel, or rotation features. It also hangs the TV very close to the wall similar to a picture frame. I was looking for a inexpensive adjustable mount with the ability to pull the TV away from the wall and the ability to tilt forward.Pros:* Sturdy - Holds my 50.9 lbs. TV without issue. I have no worries the TV will fall or the mount will bend. Box says it can hold up to 115 lbs.* Can pull out/push in, rotate left and right, slide left and right, swing left and right, and tilt.* Comes with all necessary hardware and screws.* Easy to read and follow instructions included.* Two different types of bubble levels are included for leveling the mount.* Box included several free items (6” Axis Bubble Level, Micro Fiber Cleaning Cloth, LED Keychain Light, and a High Speed 10’ HDMI cable with Ethernet.)Cons:* One corner of the mount where it attaches to the wall was damaged (bent). However, the damage was not severe or noticeable once the TV was mounted. It also did not compromise the structural integrity of the mount so I did not need to return it.* The mount tilts forward a few inches by default when it is in the upright position. This will be annoying for those who want their TV flush with the wall. Other reviewers have stated that they had to shim the mount to prevent the tilt. I believe one reviewer used a pencil.In regards to the CON mentioned above about the tilt issue. My TV is mounted a little to high on my wall. It’s not so much that I mounted it too high, it’s just the size of my wall and the size of the TV that determined the placement. My TV looks pretty good for multiple viewing angles, but once I mounted the TV on the new mount and viewed it with the tilt, I could not believe how much the picture improved.

Great! But install with care/planning

I purchased two mount, a flush mount and this articulating mount for my 65” LG 4K. I installed the flush mount first but switched immediately because the flush mount was too difficult to add/switch cables (hdmi, optical audio…).This articulating mount is better than my other Cheeta articulating mount because this one was already one piece while my other came in pieces that I had to put the entire thing together. This alone warrants a 5 star!!!It was super easy to install and took me less than 5 minutes to install.The issue I have is that my tv now tilts forward too far. The screws that lock it to the mount and hold it from tilting are now bending due to the weight of the TV. I possibly could (and should) have installed the mounting brackets much higher so the weight of the tv is hanging down vs hold up on the bracket. This would require a higher mounting of the base which wouldn’t have been an issue on my wall.Pros:One piece baseEasy installationGood range of motionCons:Mounting base installed much higher on wallAdjusting screws are weak and bend easyI would buy this again but install it differently.

Five Stars

Excellent!! easy to install, great ability to swivel, love it.

Nice mount, but wish it was a little wider …

Nice mount, but wish it was a little wider to be able to adjust for mounting placement. The mounting bracket is just wide enough to hit two studs spaced 16” apart so you…

Five Stars

Worked great for my 55 inch

Good mount for an affordable price, slight sag but it does hold my 55” led tv without any prpblems.

Works well, there is a little say in the frame when you hang the tv on it but so far it has held and I have had this for about 3 years now.

Wall mount for extra TV in guest room

I was wonderfully easy to install. Three of us used the directions which were perfect to follow and it was installed within 20 min.

Cheaper, but not an easy product.

The bracket works, but it not well design. The support pieces (suppose left and right) that allow the tv to tilt forward where the same.

Five Stars

Works great! Seems small but is very strong and compact.

This thing is awesome and my 60 inch Vizio fits it like a …

This thing is awesome and my 60 inch Vizio fits it like a charm. Highly recommended - accessories a big bonus!

Great mount- but missing parts.

We purchased 3 mounts and the first one was great, installed easily and feels sturdy. The second one we opened was missing screws. Very disappointing.