Coolplay 4pcs Anti-clockwise and Clockwise Motor with Plastic Gear Spare Parts for Syma X5 X5C X5C-1 RC Quadcopter Drone Toy

by people ...

Product Specifications

Syma X5 X5C X5C-1 Motor Set (CW,CCW)
With plastic gear,light weigt; Product Dimension: 20mm X7mm (LXD)
Completely compatible for Syma X5 X5C X5C-1 RC Quadcopter,high quality as original
Wire colors match original, making replacement easy: Clockwise Motor( red and blue wires ), Anti-clockwise Motor( black and white wires )
Package included: 2x CW Motor & 2x CCW Motor

Product Description

Description: Motor Diameter: Approx. 7mm/ 0.28inch Motor Length: Approx. 20mm/ 0.79inch Cable Length: about 130mm Weight: About 16g Motor wire: Clockwise Motor(With Red Blue), Anti-clockwise Motor(With Black White) Quantity: 4 pcs (2 CW and 2 CCW) Work for Syma X5 X5C X5C-1 Package Including 2 * CW motor 2 * CCW motor Installation Guid: Before getting started, you need Screwdriver, Cutting pliers, Soldering iron, Voltmeter, Tin lead resin for soldering, spare parts to replace the faulty components, and your patience of course. Always disconnect the battery to prevent any short-circuit. Removed all the faulty parts and carefully replaced them with the new ones. Notice: Motors with grass gears for Syma X5 X5C X5C-1,please search :B01AHQ76A8 Motors with plastic gear for Syma X5HC X5SW X5SC ,please search : B0146CF8EA

Product Reviews

Exact replacement motors for Syma X5C

These are the exact replacement motors for the Syma X5C quadcopter.I replaced a single burned-out motor and now my quad flies perfectly. Installation requires a soldering iron, but it is easy to do. The wires are color coded for easy wiring. Perfect motors to repair the Syma X5C.

extra motors…

Great little motors that work well for my quad… it’s always good to have extra motors on hand in case one or motors give out… and they will with full throttle flying… these work well in some of my other quads also…..I will be ordering again… the price is right and great service with fast shipping…

I bought this set to replace a bad motor on my Syma X5

I bought this set to replace a bad motor on my Syma X5. The Syma motor was not functioning reliably any longer, requiring a flick to engage and run, so I looked around. I replaced the bad motor with the appropriate motor from this set and the drone functioned just like new again. The motor RPM and power is identical to the originals so there was no need to make any trim adjustments to the drone function at all. Great replacement.These motors are a good price, have matching nylon gears so they won’t damage the existing rotor gears on the Syma (mixing brass and plastic is a recipe for wearing out the plastic teeth). The motors in this set are a full replacement for the Syma motors with two clockwise and two anti-clockwise motors. You can tell which is which when you are replacing the OEM motors because the wiring is different color (just do one at a time so that you don’t lose track of which goes where.The most basic of soldering skills is required to replace the motor. Open up the drone and look at the circuit board. Follow the leads from the motors to the board and gently un-solder them. Remove and discard the old motor, hold the new motor leads (match up the wire color to the wire that you just removed, it’s that simple) and re-solder. I didn’t add any additional solder or flux, just used the existing bead that remained on the board when I removed the first motor and it was done.

Syma Rides Again!

Soldered it into my X5C (first-time solderer- read up, be careful of the fumes and you’ll be okay too) with a cheap-o soldering iron & rosin-core solder.Within 50 minutes, I had my beloved X5C back in the air, good as ever with its new left rear motor.These are exactly the same as the stock motors. Tip for newbies: before disassembling your quad, Sharpie “clockwise” or “counterclockwise” on your airframe by each motor, and prop, to help you match up which motor to put where.4 stars only because, like the stock motors they replicate, they are brushed instead of brushless, which like most or all cheap quad motors will probably doom them to mere months of moderate to heavy use before wearing out.

Work but Don’t Last

I use these motors for a X5C drone. They work well but don’t last very long. I seem to have to change one after each outing. When you order they take a long time to arrive so buy a few sets. When my drone dies I will look for a better one that uses better motors.

Coolplay four pack motors

Received the new motors in a week. I took the drone a part and removed the old motor, but the old motor looked like it had some heat sink past on it. I did not have any at home so I installed the new motor. Hope that it don’t come back to bite me later. If it was heat sink past, Coolplay might tell it in the description so that the customer will have it before they get the new motors and have it on hand. I have flown the drone several times with the new motor, now problem so far. It fit just like the old motor no problem. Looks like a good deal.

Great for replacements & projects

Originally I was purchasing this pack to replace one of the motors on a quadcopter I fly around for fun, simply because of the price and rating. However when another motor went bad, I replaced that one and I want to say it appears as if the replacements work better than the originals. The only thing I noticed was my battery getting warmer faster after flying.

Good Strong Motors/ Reasonable Price/ Coolplay gets an A

I’ve only used 1 motor so far. I hear that some pilots lke to install all 4 new ar once.You do get 4 motors total. ( I didn’t do that this time. But I can say that the -new motor i broke in- a lill slower for the first flights but now we are at full power for sure. Yes, the motors, are fast, at least as fast as stock but I do have to trim a bit since I only changed 1 motor.Packaged real well. Came on time. The wire is plenty long enough. Ready, Steady, Motor Change!2 CCWs2 CWs

Work well for Syma X5C-1

As a beginner to drones there is a need for replacement motors and these work well.

3 out of 4 ain’t great

One of the motors was faulty right out of the package. Would work only intermittently.

I simply swapped one of my old motors for one …

I simply swapped one of my old motors for one of these and it worked perfectly. I didn’t need to replace all 4, so that is a big plus. ¹⁰⁄₁₀

Easy to install

Just what I needed. Only needed one but now I have spares just In case. Used existing solder on board to install. Easy to install.

great

easy to attach, great quality and fixed rotars of droid.

Five Stars

good buy worked okay

One Star

wrong motors, didn’t use.

Five Stars

Excellent.

They work on my hubsan 502s but they are lacking …

They work on my hubsan 502s but they are lacking the power the stock motors put out in , y honest opinion I would recomend staying with the one that say hubsan replacement instead…