Full Motion TV Wall Mount Monitor Bracket for 22-52 Inch LED, LCD and Plasma Flat Screen Displays up to VESA 400x400. Universal Fit, Swivel, Tilt, Articulating with 10’ HDMI Cable

Full Motion TV Wall Mount Monitor Bracket for 22-52 Inch LED, LCD and Plasma Flat Screen Displays up to VESA 400x400. Universal Fit, Swivel, Tilt, Articulating with 10’ HDMI Cable
Full Motion TV Wall Mount Monitor Bracket for 22-52 Inch LED, LCD and Plasma Flat Screen Displays up to VESA 400x400. Universal Fit, Swivel, Tilt, Articulating with 10’ HDMI Cable
Full Motion TV Wall Mount Monitor Bracket for 22-52 Inch LED, LCD and Plasma Flat Screen Displays up to VESA 400x400. Universal Fit, Swivel, Tilt, Articulating with 10’ HDMI Cable
Full Motion TV Wall Mount Monitor Bracket for 22-52 Inch LED, LCD and Plasma Flat Screen Displays up to VESA 400x400. Universal Fit, Swivel, Tilt, Articulating with 10’ HDMI Cable
Full Motion TV Wall Mount Monitor Bracket for 22-52 Inch LED, LCD and Plasma Flat Screen Displays up to VESA 400x400. Universal Fit, Swivel, Tilt, Articulating with 10’ HDMI Cable
by people ...

Product Specifications

  • COMPATIBLE FIT FOR MOST 22”-52” FLAT-PANEL TVs: Designed to accommodate almost all 22”-52” and many 55” LED, LCD, Plasma and other flat-screen displays, this heavy-duty TV mount is fully rated to support up to 80 pounds.
  • VERSATILE, LOW-PROFILE DESIGN: Multi-purpose, sleek design offers a stylish look to suit any décor. The mount compresses to just 1.75” and extends up to 19.25” from the wall. The articulating arm allows for offset mounting, where the panel (when extended out on the arm) can be shifted horizontally up to 17.5” left or right.
  • MAXIMUM TILT & SWIVEL CAPACITY: Enjoy comfortable, optimum viewing from nearly any angle with a +10°/-2° tilt capacity, along with a 180° swivel capability.
  • VESA COMPLIANT: Supports VESA mounting standards including 100mm x 100mm, 100mm x 200mm, 200mm x 200mm. Included extensions that are easily added with two screws each supports 200mm x 400mm, 300mm x 300mm, and 400mm x 400mm.
  • INCLUDES COMPLETE MOUNT HARDWARE: Everything needed to mount is conveniently packed in this set, including HDMI cable, magnetic level, installation wrench, full hardware package, and instructions.

    Product Description

Upgrade your TV viewing experience and save valuable floor space with the Mount Factory TV mount, offering over 19” inches of extension, 180° swivel, and +10°/-2° tilt capacity to reach the best angle possible. Solid, heavy-gauge steel construction mount fits virtually all 22”-52” LED, LCD, Plasma and similar flat-screen display TVs.

Smooth articulation from the wall makes it easy to point the TV exactly where you want it for the best view or to reduce glare, while a slim, low-profile design allows it to compactly compress to just 1.75” when not in use.

To ensure fit of the mounting pattern, check the VESA pattern for your panel, either online or by measuring between the screw holes on the rear of the TV or panel (100mm is about 4”).

Specifications: Fully rated for up to 80 pound displays. RoHS, CE, and ISO-9001 certified.

Complete mount package includes: pre-assembled, 12-gauge powder-coated, heavy-duty steel mount, a magnetic level for even mounting, optional mounting extensions for use with larger TVs, installation instructions, and a full hardware package complete with an installation wrench, stud wall screws, masonry anchors, mounting screws, washers, and spacers.

Product Reviews

Works amazingly on my 46” Samsung LED LCD TV!

I have a 46” Samsung LED LCD TV and it has held it up incredibly well and I have no fear at all that it will fall. As other reviewers say, the instructions could be better, but seriously, if you’re installing a wall mount yourself, you have to use some common sense. The parts are incredibly strong and just make sure you see which side goes up and which side goes down, as it is crucial to your installation. I would highly recommend this to anyone out there.

Nice product!

This is a pretty good product and great for the price. I read many reviewers complaining about the instructions, tools and mounting hardware but I didn’t use any of these. The most important thing is to insure it is mounted level! It looks like the kits now come with a level so use it!If you do not need the extra brackets to mount the TV they can be used to mount a sound bar if you are savvy.I mounted a sound bar, a DirecTV wireless receiver, a surge protector and hid all the wires on mine using zip ties and small wood screws…

Good product at 13 the price of similar units in our local stores.

It’s not perfect, but close enough. The TV wall mount came as advertised and thanks to Prime I had in on my doorstep in 2 days. This is a beefy (and heavy) mount. I’m sure it weighs more than the 32” Samsung that it is now holding up. I had no problems mounting it to the wall… after I found the wall stud, OK so my 21 year old stud finder was DOA and I was too lazy to drive down the hill to the hardware store to buy a new one; anyway, the extra holes can be puttied over. The included 316” x 3” lag bolts are overkill for my TV, or all TVs this mount is rated for. I can’t review the Sheetrock anchor system that is included because I screwed into a stud, or the mount extenders as my little Sammy fit the 4 holes in the base plate so didn’t need to add the wings. The only “bad” thing I ran into was the mounting screws that attach the TV to the mounting plate. The included screws were too short to also use the spacers, but were about 18” too long to screw directly into the TV. I really don’t blame anyone for this and was prepared to drive to the HW store to buy the correct screws, but found that a couple of thick washers on each screw worked so I saved myself a drive. The mount folds nicely and is very stable in all positions. One thing I did that helped me, but I’m really not sure if it was worth the extra time was to unbolt the wall base from the arm so I didn’t have to hold the whole thing in place while I bolted it to the wall.

Great universal mount.

I bought two of these mounts for two 32inch Vizio TVs I use as computer monitors in my office and I couldn’t be happier. Now there is more space on my desk plus I can position the monitors how I please, without any hassle. The price was great as well (the price of similar mounts is around 3 times more expensive at the big box retailers) and they are very sturdy and could hold a much larger TV. They were very easy to instal but I would recommend having a friend help and make sure you have a level, a marker and a stud finder as well also, having a drill and an electric screwdriver will make things much easier for you. They instructions are poor, but it wasn’t too hard to figure out. I now have every TV in my home mounted to a wall. This mount should work for any brand of led TV up to 46 inches. I think plasmas are heavier so check the weight capacity of the mount and the weight of your TV before ordering.

I don’t even know where to start!!

This wall mount was PERRRRRRFECT for my new 50” Vizio TV. I could not believe the superior quality for the price. It is extremely sturdy, and was very, very easy to mount to the wall. My 50” Vizio only weighs 28 lbs and did not require the extension arms to mount to the TV. It mounted perfectly on the main mount and is very secure. It does allow for a lot of movement of the TV and quite easily. HIGHLY recommend this mount. Instructions aren’t the greatest, but really easy to figure out.

Well Built and Extends Smoothly

Very well made, slides smoothly and extremely strong. I’m just holding a 23 inch monitor with it but it does not bend noticably at full extension. The plastic covers fit well but are hard, thin plastic and I don’t have much long term confidence in them. Overall though I would totally recommend this.

Easy to mount and works great with a Samsung UN32J4000AF TV

Easy to mount, just use a stud finder to locate both sides of a stud for the top hole and the bottom hole, then drill a pilot hole in the center of the stud for each of the 3 mounting holes (bottom, center, top). This is a very heavy/strong TV mount & does have a ~ 5” offset from the stud mounting center hole to the center of the TV. But this was fine for me and it holds my Samsung UN32J4000AF TV just great. The Mount Factory TV mount was perfect for the VESA 200x200 (M8) pattern on the back of my TV - I used the four M8 screws that came with the mount; however I did need to go to Lowes to get a bag of M8 washers ( 2 washers were use under the head of each screw to meet the TV mount guidelines). If you are placing this in a corner or near furniture, draw a detailed diagram first to make sure the TV sides/top/bottom have clearance when the TV is moved in its different positions

Difficult but perfect.

It took forever it seems like to put together. And I’m so thankful it wasn’t just me and my boyfriend that put it up, because there is absolutely no way we would’ve been able to do it ourselves without wanting to kill one another. Other than the difficulty, it’s exactly what we wanted! We wanted the tv for our play room, and it rotates enough that we can swing it around the corner into the living room so now my boyfriend can watch two football games at once….. Men.

Works as expected.

Works as expected. Pay attention to the directions you don’t want to put too much weight on this or your wall

Five Stars

It works perfect

Heavy

This is what I ordered but not what I expected - Item wayyy to heavy for my little 32”,waited to late to send it back maybe a relative or friend could use it.

Five Stars

Have two of these and they are great. Easy to install.

Five Stars

Worked perfect ….happy.

Five Stars

Great buy

Five Stars

Great deal!

Fail at mounting my monitor?

does not work with my lg monitor? :(

Awesome

Awesome

Five Stars

Easy to install and did exactly what we wanted it to. Arrived on time and packed very safely.

Get it at Amazon

comments powered by Disqus
web analytics