GPU Mining Rig Open Air Frame Case
by people ...
Product Specifications
- Stackable Wood Frame, Lightweight, Good Materials.
- Up to 9 GPUs. Ethereum/ZCash/Monero/SiaCoin. Size: Width: 24” Height: 13.5” Length: 12”.
- ATX Motherboard, 2.5 HDD and PSU pre-drilled holes.
- ATX Motherboard Standoffs and Screws included.
9 Tie Wraps included for PSU and HDD easy holding.
Product Description
GPU Mining Rig Open Air Frame Case. Sturdy, lightweight wood Frame
Product Reviews
Overpriced
Way overpriced for what it is. As others have noted item is not as pictured. Has only 1 GPU/riser support rail not two as shown. I added a second one in order to mount my risers in place. One of the screws on the bottom was not installed far enough and scratched my wooden floor when unit was moved (empty). Bottom shelf is NOT pre-drilled as shown in image. Bottom shelf is supposed to support motherboard and power supply but is only 1⁄4” plywood. Will flex and warp unless you add reinforcement underneath. It is fairly compact but because of this the frame will not fit 2 power supplied unless you mount the PSUs exhausting to one side, in that case part of the PSU exhaust will be blocked by corner posts. ATX power supplies will not fit vertically. Came with some rather large wood screws to mount motherboard and GPUs. I’d recommend using smaller screws and remember to pre-drill when mounting GPUs or the wood will split!
Well build open air case
First of all, this case is well build and solid. I paid way too much for it tho and see the price came down and it is now prime so no shipping costs, which I also paid. Besides that, it has pre-drilled holes for the motherboard and includes all the standoffs and screws needed. Also has pre-drilled holes for zip ties and correct hole locations for both an SSD and the power supply. This case is much cheaper than quite a few of the other cases available. I chose not to build my own and go this route to save time. It can stack but you will want to install a bracket on the legs so the case on top is more stable. I plan on buying another one very soon for a 2nd miner. I am not going to stack but rather place in a white bread type rack for better air flow.
Holds 7 card great.
This rig is awesome. The only problem is when it’s loaded with two power supplies and a motherboard, it starts to sag. It holds the cards great. I’m using the one I bought as a model to build my own. The materials are cheap and I’m putting a piece in between the base pieces to reinforce the load from the additional power supplies.My setup has 7 Geforce GTX 1070 cards in it.
nice but when you put all the things
nice but when you put all the things.. turn really heavy and frame starter moving and looked like it would fall a part
This is one of the worst chassis I ever brought
This is one of the worst chassis I ever brought. First, the location of all the pre-drill holes are all over the place, they don’t fix any normal motherboard mounting holes! If one buy this chassis, expect to re-drill all the mounting holes again by yourself! Second, the product is over priced … just a few stripe of wood for the price of over $80 is ridiculous with the kind of workmanship I am receiving! Third, the base of the chassis is cracked when I receive it and I have to glue them back. In plain honestly, with the amount of work that one have to put in to make it work, it is better you buy the raw material and make it yourself!
Five Stars
ok
Misleading
No predrilled holes whatsoever, as listed on the description. No risers included at all either. Also comes with one bar, not two. Super misleading and poorly built.
Great for a few rigs but expensive
These worked great. I ended up copying the design and building my own for the next 8 rigs but these are MUCH higher quality than what I built. Shipping sucks but that’s to be expected due to the size.
Have fun trying to get those in
The holes arent drilled right. They also arent tapped for risers. Have fun trying to get those in.
I’m really happy with this case
I’m really happy with this case. I was worried It would be made from poor quality wood, but it is actually very nice and well constructed.
Great rig to start with
I bought 2 Mining Rigs from these guys and am very happy with my purchase. It looks like they’ve changed the design of the rigs, mine has two wooden bars that go across the frame.
At the Price point, it just didn’t meat with expectations.
comments powered by DisqusThere are many disappointing elements to this product. My first concern was there wasn’t really enough screws and offsets included. A quality case usually has several extras.
