HDTV Antenna Mount - 20in

by people ...

Product Specifications

20in tall x 1in diameter powder coated steel tube
Ideally suited for antennas
Base pivots for flat, angled, or vertical use
Includes mount, all-weather lag bolts, sealing tape, and instructions
90 day warranty on parts

Product Description

Style:20in Mount The 20in HDTV Antenna Mount is made from 1in powder coated steel tube and is ideally suited for the ClearStream series of antennas. The mount base pivots for flat, angled, or vertical use, and includes sealing tape for worry-free installation. As a leader in cutting-edge antenna technology, Antennas Direct is dedicated to providing superior products supported by a robust warranty and a world class call center located in St. Louis, MO. Need help? Live chat with our team 7 days a week at antennasdirect.com or call toll-free 1-877-825-5572 for service and selection advice. Includes mount, all-weather lag bolts, sealing tape, and instructions.

Product Reviews

Could use another 2 to 4 inches

I bought the 20 inch model to go with this antenna: Antennas Direct 4 Element Bowtie Indoor/Outdoor HDTV Antenna (http://www.amazon.com/Element-Bowtie-Indoor-Outdoor-Antenna/dp/B0074H3IU6)The location of this antenna is in my attic. The mount is screwed to the studs in the ceiling (flat part). With this setup, I can just barely fit the antenna. I have pretty much no way to adjust the tilt because it’s pushed up against the ceiling. With a few extra inches, I feel like I would have better control. But the antenna works great in this location, so luckily I don’t need that control. If you do, then get a longer version.Also, because this is going into ceiling studs, I could only use 2 of the 4 lag bolts. In this location, that is fine, because it won’t be in the elements. But if you are mounting outside, consider that that mounting holes may not get you a 100% solid mount.

Solid J-Mount extender. Works well!

This mount is perfect for what I needed it for – to mount the BoostWaves Antenna to the side of my roof. It is strong and can be easily manipulated into position and then tightened down. It is powder coated too so it will last forever without rusting.I needed more height than what this offered, so I went to my local hardware store and bought an 8-foot piece of 1” diameter PVC tube to use as an extender. Much cheaper than buying a metal extender here on Amazon and it will last just as long. I extended my antenna 6 more feet higher. I drilled holes into the top of the PVC tube and ran wire to all four corners of my roof to keep the pvc steady in the wind. No problem! Simply put the PVC into the top of this mount and bolt it in. Works like a charm and I definitely recommend this J-Mount. Just be careful it fits your antenna diameter. The maximum diameter to insert any pvc tube, extender tube or antenna tube into the top of this mount is 1 inch! Of course, you can buy a slightly smaller diameter, but DO NOT buy a larger diameter extender unless you have an adapter to scale it down to 1” or smaller.

Great mast for HDTV Antenna

This is a very nice mount. Mounting it was very easy and it holds my 7 foot yagi antenna perfectly! I was looking for a taller mast and this fit the bill. Great purchase!

It’s good, but for my purposes in the attic

I used this to mount an antenna in my attic. It’s good, but for my purposes in the attic, a simple metal pipe and a few mounting straps from the home improvement store would have worked just as well - for less money. On the other hand, for an outdoor mount where appearance is more important, this product is a good choice.

HDTV Antenna Mount - 20in

I bought this antenna mount for mounting a 1PLUS HDTV Antenna Outdoor 150 Miles Range 360°Rotation Outdoor TV Antenna with Wireless Remote for Roof High Crystal Performance in my attic. Perfect fit for the antenna and was easy to mount to one of the ceiling joist in the attic.

Looks larger in picture although the dimensions were correct in …

Looks larger in picture although the dimensions were correct in the product description. It has hardware to mount on a surface, but does not have hardware to mount the antenna on the mount’s pipe. I did not have a problem installing it on my roof with the hardware provided. If the antenna mounts to the end of the pipe, make sure the pipe is the right diameter for the antenna.

I ordered the Antennas Direct 20-Inch Antenna J-Mount to install …

I ordered the Antennas Direct 20-Inch Antenna J-Mount to install a bird house my wife had purchased. I wanted it mounted on the shed. I also purchased the Birds choice Mounting Flange For 1” Pole to attach the bird house to the J-Mount. Both items worked perfectly. The bird house has been mounted for over two months now with no problem.

Good Mounting Post.

The antenna mount was exactly like the one supplied by the antenna manufacturer except it was 20” longer. The extra length allowed me to mount the antenna in a more obscure location.