Mount-It! Tilting TV Wall Mount Bracket For Samsung Sony Vizio LG Panasonic TCL VESA 200x200 400x400 600x400 850x450 Compatible Premium Tilt 220 Lbs Capacity, Size 42-80 inch
by people ...
Product Specifications
- Universal design TV wall mounting brackets fit virtually all flat-panel TVs from 42” to 70” (some up to 80”). VESA compatible 300x300, 400x200, 400x300, 400X400, 600x200, 600x300, 600x400, 700x400, 700x450, 750x450, 800x450, 850x450. Fits TVs with installation holes up to 34” apart horizontally and 17.7” apart vertically.
- Do not trust your precious TV to a flimsy and cheap wall mount. This heavy duty TV mount has carrying capacity of 220 lbs. This bracket is one of the strongest brackets available on Amazon - Constructed from 2 mm thick Reinforced Steel.
- Continuous innovative tilt motion is possible without the use of tools. Easy one-touch tilt to reduce glare. Back Plate features a number of large heavy gauge cold rolled steel - this bracket is very strong and allows mounts over plug sockets and Ariel plates.
- Back of the TV stays 3 1⁄4” away from the wall. 34” wide wall plate supports block wall installation or installation on either 8”, 12”, 16” or 24” wall studs. Note, this mount can be wider than some 32” TVs. Please check the width of your TV.
Very simple to install. Includes complete hardware kit, integrated bubble level for alignment and installation instructions.
Product Description
Size:42 - 80 inch
Mount-It! Tilting TV Wall Mount
Heavy-Duty TV Wall Mount
MI-303L is a heavy-duty tilt TV mount for a 42 inch to 70 inch TV. It will safely secure your precious flat screen TV to any wall. It is one of our top selling tilting wall mounts. Don’t risk your TV with the cheaper models! Cheaper mounts use lower grade and thinner materials. MI-303L is made from 2mm thick cold-rolled high-grade steel. With its rigid reinforced wall plate and two adjustable brackets it can safely hold your flat screen TV up to 220 lbs.
Universal Compatibility
MI-303L is one of the largest tilt mounts you can find on the market. With its adjustable brackets it is compatible with almost TVs on the market from 42” to 70” (some up to 80”). VESA compatible 300x300, 400x200, 400x300, 400X400, 600x200, 600x300, 600x400, 700x400, 700x450, 750x450, 800x450, 850x450. Fits TVs with installation holes up to 34” apart horizontally and 17.7” apart vertically. VESA measurements are the spacings of the holes on the back of your TV. Please measure these to ensure that your TV is compatible with this bracket.
Features
MI-303L features easy-to-turn adjustable tilt knobs on the brackets to securely tilt your TV up to 15 degrees both up and down to optimize your viewing angle from your seating area. The back plate features four large cut outs to mount over plug sockets and Ariel plates and to route cables. Includes integrated bubble level for alignment. The vertical brackets include a safety screw to safely secure the TV to the wall plate. It is very easy to install. This mount ships with hardware to assemble and mount in stud, masonry, or drywall. Easy-to-follow installation instructions included. The wall plate dimensions are 36.5” (W) x 9.5” (H), the brackets are 20” (L).
Product Reviews
Good set up
Good set up, has an angle tilt so you can tilt it down. This set up allows you to slide the brackets to either side to move the tv over. Easy hang catch on top with a screw in bottom to secure to the wall mount part when hanging.
Decent For the Price, But Watch Out for Leveling
I was pretty surprise to find a mount of this size at this price point. I was a little nervous as well, as price usually dictates quality with these things. Turns out I was right to question it.I went to great lengths to ensure I was doing a good job with the installation. A friend and I worked together with a laser level and several spot checks as we put it in. The built in level was massively inaccurate - I would recommend against trusting it at all. Despite the honest effort, after putting the TV up there is a slight tilt that can’t be corrected by adjusting it, even after going with a laser and manual level. It’s not a massive tilt, but it’s certainly noticeable. I’m going to try to stuff some padding where the the TV sits in the mount to prop up the offending side to see if that helps.TL;DR: 3 stars for being affordable and of seemingly decent material quality. Stars lost for what must be warping / poor consistency in mount shape.
Great Tilt Mount Installed In About 2-3 Hours (revised)
Revision clarification: Comment applies only to the larger version of this wall mount (i.e. for 42”-70” TV version). This is a partial repeat of a comment I made under questions for this item. I just bought and installed this mount for a 42” LG TV. My wall application was for a sheet rock surface with wood framing wall joists 16” on center. It is an excellent wall mount and all the hardware is more than appropriate in strength and stability for mounting a TV on the wall. The only difficulty lies in locating your wall mount plate (i.e. assessing exactly where you want the TV be located on the wall, finding wall joists, and if applicable assuring wall cable and electrical connections are covered by the TV). The wall mount plate is 36” in length. This means that, for wall joists spaced every 16” typically, the wall plate holes one uses to bolt into the wall joists easily span a 32” length between say a first and third wall joist. This would have your TV centered over the middle (second) wall joist. Alternatively, attach bolts to the wall spanning consecutive wall joists, 16” apart, with the TV centered between two wall joists. Assuming you centered bolt locations correctly on your wall joists, either approach will have 4 lag bolts of over 2” in length screwed into wall joists to bear the weight of your TV. This would easily be strong enough, and allows great flexibility in positioning the TV location. HOWEVER, when attaching your wall mount plate, be aware that for a 40”-42” TV you must center your TV exactly on the wall mount or the wall mount plate will likely be visible; most 40”-42” TV’s are only slightly greater than 36” wide! Not an issue for the larger flat screen TV’s, I suspect. There were some review comments made about adequate wall mounting bolt length and strength. I found all bolts to be more than adequate for length and strength.
Very sturdy. Mounted my 70” on it with no worries …
Does the job. Very sturdy. Mounted my 70” on it with no worries on 3 studs. I had the level that was supposed to come built in missing but it didn’t bother me because I wouldn’t have trust that level anyways. Just used my own level. Overall good product.
holds my 60” 90lb TV with Zero issues. Highly recommend
I bought this to mount a 90lb 60” TV in my living room, it works perfectly and I can’t imagine spending the $150 my local store wanted for the same concept. I love this mount is one solid piece, the wall plate needs no assembly like others which adds to the stability and strength. It holds my sharp brand TV perfectly. Some people said the bolts are not good, I disagree, I went to the store and bought some so when the mount arrived I could install it quickly, after looking at the kit I found the bolts were good quality. This mount has everything you need and works perfectly.
It was easy to install
Purchased this wall mount bracket to mount our 60” tv to the wall. Looked at several others on the market and chose this one because of it being a one piece design. It was easy to install. Took maybe 30 mins from start to finish. It was a little difficult to hang the tv once the wall mount was mounted, but after a couple of tries we got it.
Very sturdy. Easy to install
Very sturdy. Easy to install. It’s designed to stay hidden behind the TV so you don’t notice the mount. When installed properly It gives the TV a very clean look against the wall. They provide you with all the necessary hardware to mount a variety types of flat screens. I later bought a second mount for another of one of my TV’s which had a different contour in the back than the first screen and I found they provided extra spacers so the mount gets a flush fit to the back of the screen in any situation.. An issue I didn’t run into with my first TV. I was able to anchor the mount into the wall studs which is the preferred method. I’m confident during an earthquake these TVs aren’t going anywhere. Although the mount comes with its own built in level, I would recommend using one of your own, which I did because I found theirs lacking, needing to be designed with tighter tolerances for accuracy. Although this problem might have been solved if they had added a better explanation or even a diagram on how to sight the level on their instruction sheet. Knowing this I’d buy another if I had need of one.
Easy to install.
Purchased two to put over my fireplace, works great. Mounted a 55 inch and 65 inch not problem.
Five Stars
Great wall mount. Comes with a level and easy to hang. Plus I love the price point.
Five Stars
Great product! It is easy to install, very supportive and the tilt adjust perfectly.
Works fine
As expected
Five Stars
Great product!
Five Stars
actually I bought only (i) one and I received (2), can I return (1).?Thanks Elkin
Five Stars
Great product. It was fairly easy to mount, even though I have never mounted a tv before
Five Stars
Nothing to say other than easy install and works as advertised. Happy with the purchase.
Great Wall Mount for TV
Absolutely the best mounting and tilting wall mount for our 55 inch tv.
Five Stars
comments powered by DisqusFit my TV a 55 inch Vizio TV great. I would buy again. Super sturdy.
