Mounting Dream MD2268-LK TV Wall Mount Tilting Bracket for Most 42-70 Inch LED, LCD and Plasma TVs up to VESA 600 x 400mm and 132 LBS Loading Capacity, 6 FT HDMI Cable and Torpedo Level

Mounting Dream MD2268-LK TV Wall Mount Tilting Bracket for Most 42-70 Inch LED, LCD and Plasma TVs up to VESA 600 x 400mm and 132 LBS Loading Capacity, 6 FT HDMI Cable and Torpedo Level
Mounting Dream MD2268-LK TV Wall Mount Tilting Bracket for Most 42-70 Inch LED, LCD and Plasma TVs up to VESA 600 x 400mm and 132 LBS Loading Capacity, 6 FT HDMI Cable and Torpedo Level
Mounting Dream MD2268-LK TV Wall Mount Tilting Bracket for Most 42-70 Inch LED, LCD and Plasma TVs up to VESA 600 x 400mm and 132 LBS Loading Capacity, 6 FT HDMI Cable and Torpedo Level
Mounting Dream MD2268-LK TV Wall Mount Tilting Bracket for Most 42-70 Inch LED, LCD and Plasma TVs up to VESA 600 x 400mm and 132 LBS Loading Capacity, 6 FT HDMI Cable and Torpedo Level
Mounting Dream MD2268-LK TV Wall Mount Tilting Bracket for Most 42-70 Inch LED, LCD and Plasma TVs up to VESA 600 x 400mm and 132 LBS Loading Capacity, 6 FT HDMI Cable and Torpedo Level
Mounting Dream MD2268-LK TV Wall Mount Tilting Bracket for Most 42-70 Inch LED, LCD and Plasma TVs up to VESA 600 x 400mm and 132 LBS Loading Capacity, 6 FT HDMI Cable and Torpedo Level
Mounting Dream MD2268-LK TV Wall Mount Tilting Bracket for Most 42-70 Inch LED, LCD and Plasma TVs up to VESA 600 x 400mm and 132 LBS Loading Capacity, 6 FT HDMI Cable and Torpedo Level
by people ...

Product Specifications

  • Fits most 42-70” TVs up to 132 LBS, with max VESA/mounting holes spacing of 600 x 400mm. Our mounts are tested 4 times loading weight claimed. Images on left side will help you see if this mount perfectly fits your TV in the aspects: VESA, studs spacing and possible blocked input. Not perfect? You can check other Mounting Dream mounts for BEST options.
  • Place your TV close to wall, 1.5 flush profile, saving space greatly with stylish appearance.
  • Tilt your TV forward to reduce glare for better viewing.
  • Easy installation with decent instruction, and all included hardware in pre-labeled bags. Pulling straps locks and releasesTV breezily. Comes with 6 ft HDMI, bubble level and Velcro ties for cable management.
  • US based customer support answers your pre-purchase and installation questions. Our mount is 10 year warranted!

    Product Description

Fits 42-70” TVs

This mount fits most of 42-70” TVs sold today. It fits TVs with mounting holes as close as 8”x4” or as wide as 24”x16” (in TV terms - VESA 200x100mm to 600x400mm).

Low 1.5” profile Flush-Tilt design is only 1.5” from wall yet still tilts to improve viewing and reduce glare.

Heavy duty steel construction and automatic robot welding technology This mount is constructed with heavy duty steel materials and with durable powder coated finish, and 100% welded by automatic robot, this advanced welding technology makes the mount sturdy and ensures mounted TV stable and secure, supports TV weight up to 132 lbs.

Fits 16” or 24” studs plus concrete wall This mount fits for 16” or 24” studs plus concrete wall typical in US homes. Not for dry wall alone application. All installation hardware included.

Torpedo bubble and 6’ high speed HDMI cable It comes with Torpedo level and 6’ HDMI cable. HDMI cable supports 3D, Ethernet, 1440P and Audio Return conforming to latest HDMI 1.4 Standard.

Includes all necessary mounting hardware This mount ships with hardware for both wall and TV mounting.

RoHS certified This product is RoHS certified, RoHS is the European Union directive standard of Restriction of Hazardous Substance, aiming to protect human health and environment.

Prevents falling off from both sides of horizontal bar You can slide the TV assembly left and right over the horizontal bar of the wall plate but still can prevent the TV assembly from falling off from the horizontal bar because of the stop plates at both ends of the bar.

Product Reviews

Simple and Easy to Install

This wall mount is extremely strong and able to support my new Samsung 55” flat screen. I was able to screw the mount into two wall studs top and bottom, ensuring this is mounted to the wall safely and w/o any concern of it coming loose. The tilt option and the quick release pull downs are easy to use. The quick release is a great safety assurance that no one is able to accidently lift the bottom of the TV away from the wall. But should you need to do so, each release is quickly accessed by hand and because the TV is a 55” unit, it hides the release pull down ribbons very well. You’ll want to use a “real” level and not the 1” bubble level that comes with the wall mount.Installing it was very easy, all (and more) of the screws, washers, connectors came in the package, so no need to have to run out to the hardware store due to missing parts. Instructions were written very well and easy to follow.

Good quality, economical TV mount.

I used this to mount a Ultra-Slim Samsung 55” LED TV above a fireplace so I wanted some tilt while maintaining a low profile. TV mounted easily and even with just under 10 degree tilt I had no issues with connections and cables behind the TV.One of the arms that mounts to the TV did not want to latch onto the frame even when pulling down the release cord. I could get it to catch without the TV mounted, but once the TV was mounted I was no longer able to place pressure in the right location to get the catch far enough over the frame to mount. Does not affect appearance and as one of the two are latched and I don’t live in an earth quake area and too high for kids to reach it works fine, but why removed 1 star.

There are better mounts out there but these are very good at this price.

Although I prefer one piece mounts to one’s that have to be assembled such as these, these worked great to mount 3 flat panel TVs in my new home. Leveling them can be a bit of a chore due to the center connector of the 2 piece mount giving such a short span to reference. You have to be careful when assembling the 2 piece wall bracket to ensure the center support and each side piece are in the same “plane” when referenced from the top. Once that is done though the rest of install is a breeze. I also recommend if only one stud is being used to secure it in other holes using better dry wall anchors than the ones supplied. I got lucky on 2 of the 3 mounts and was able to get it secured to 2 studs. On the third I used large toggle style drywall anchors that engage a large area on the back of the drywall. All in all I am happy with the mounts.

Very sturdy!

Easy to install and it was easy to get the TV mounted on it. I did use 4 snap togglers that were rated for 200 lbs ( I went a little overboard) each to mount it to the wall. My new 43” LG 4K TV weighs about 19 lbs. and is very thin and I am confident that it will we be on the wall till I take it down. Mounting dream does not recommend this and you should know what you anchors are rated for and the weight of your TV to make your decision. But I did not have the studs where I needed them to be.

Excellent heavy duty value wall mount

Excellent quality wall mount. Was very easy to set up, especially with a level included. Instructions are clear and easy to understand. Mounted our 40” LG on our wall. We have non standard 19” wall studs so this was a perfect kit. Very heavy duty. Loved that it comes with a braided HDMI cable and a flush adapter, other kits don’t include them and so that would of been an additional cost. Excellent value priced mount compared to others, would highly recommend.

went up very easily, came with a variety of mounting hardware and …

Outstanding! I ordered this CHEAP TV mount because I had no choice but to get a cheap one. Well boy did I hit the lotto. This is very well made, went up very easily, came with a variety of mounting hardware and a variety of hardware to attach to TVs. On top of that, it came with a level and an HDMI cable. Really? At this price? Yes! I know I’m gushing, which I don’t normally do in reviews, but I was very impressed with the product for the price. A very rare (for me) five stars!

Simple Installation

Easy installation I must say. Mounted a 47 inch Samsung with ease. The most time consuming part was locating the wall studs. I much prefer a magnetic stud finder over an electronic. The electronic stud finder, mine at least, wasn’t accurate (edge-to-edge). The magnetic stud finder, which you can find for around $10 at HD or Lowes, was incredibly accurate.Socket wrench for the lag bolts also made things easier. Only recommendation: make the HDMI cable solid black. The blue coloring makes the cable less inconspicuous. We plan on mounting another TV in the future and I’ll be purchasing again for sure.

Nice look and easy to install

I’ve used two of these, one on an older 44 inch TV and another on a new 70 inch. I really like how tight they mount to the wall, almost impossible to see any of the cables behind the TV. Installation was easy on the 44 inch but the kit didn’t have the correct mounting bolts for the Samsung 70 inch. I was able to make due with a dremel tool and some different bolts.

Sturdy design, does the job.

I had reservations as when I received the mount since I had never used a three piece plate system like this one.

Five Stars

Perfect for my 65 inch plasma flat screen!

Five Stars

Great value and easy set up

These are great mounts, great price

These are great mounts , great price , I thought they would be lesser quality because of the price , I bought four more for my other tvs and hope they are around when I need more…

Wrong bolt & spacer.

Did not come with the correct bolt & spacer configuration for my 55” Samsung.

Five Stars

Quick and easy install. Second mount I’ve bought from this brand and I’ve been happy with both

Five Stars

Very easy to mount and holds up my 55” Vizio tv.

Easy to install

Easy to install. Fit perfectly in mounting a 65” Sceptre. Tilt works great as well as the side to side shifting for perfect TV centering.

Easy TV

Easy,perfect,bargain

Great buy

Fantastic fits my 55” 2016 LG tv

Get it at Amazon

comments powered by Disqus
web analytics