






What You Get: POTEK 1 solar charge controller,full 18-month Worry-Free Warranty and friendly customer service
Size:30A Why POTEK?: Potek is devoted to providing best quality products with a better price.
Specification:: • Rated voltage: 12V-24V • Rated charging current: 30A • Rated load current: 30A • Dimension(L×W×H): 160 X 110 X 45 mm • LCD display • Adjustable controlling parameter of the system • Suitable for Home, Industrial, Commercial etc
Protection: Over-load protection;Short circuit protection;Lightning protection; Under-voltage protection;Over-charging protection;Reverse Polarity protection
Note: • Installation of this product should be carried out by qualified personal • Keep away from children • Keep controller away from firect sunlight,electric heaters,or high temperature electrical appliances • Controller’s input current must be smaller than 30Amps/450 Watts • The charge controller is not waterproof,should be placed in a well ventilated dry area,free from flammable gases and moister
Package List: • 1 x Solar Charge Controller • 1 x User Manual • 18-month warranty
Very easy to set up and connect between battery and solar PV panel. Be sure, per instructions, to always connect the battery side FIRST or risk frying the circuit. And of course, make sure you are below 10 amps.I replaced the plugs and used different plugs that I ad, so that the battery side plugs into a connector for the battery, and the solar PV side goes through another plug to the solar PV. As my installation is on a small trailer, this makes it easy to temporarily set up the solar PV, as needed.
I have no issues with the the solar charger. It works as expected. I am using the charger on two different solar panels wired together with no issues. I read the reviews about the charger being wired opposite polarity and still purchased. Many other solar chargers appear to have the same “issues” . Having worked with different older panels over the years, I have found that the “red and black ,or the green and black” (or other) configurations are not universal to denote polarity. I use a volt meter to determine the polarity from every panel. The color wiring scheme is not always what one would assume. That’s my story and the I am happy with the Potek solar charger.
Appears to be a good, simple, small charge controller. Time will tell.Update: easily resolved the polarity issues that seem to be plaguing many. Purchased a pack of these for $6.00; no wiring cutting or soldering needed to be done - 5 Pcs SAE to SAE Quick Connect Disconnect Weatherproof Heavy Duty Connector Plug Ends Black Color
I’m feeding a pair of small batteries in a gate opener using a 15 watt panel controlled by this tiny box, working great so far.
It appears to work. Do have to be conscious of your wiring. Have it hook to a 50w solar panel going into a 12VDC battery installed in a trailer. Drives lights and a winch!
Great works very well
The frist one I got didn’t work I thought, called the company and they sent me a new one, still could not get it to work so I gave up.
I had a 7 amp charger short out and needed a replacement (mouse knawed on the wire), I run a couple 15 watt panels on the roof of my toolshed, these do what they need to do and make good replacements for the sunforce kits sold in tractor supply.
Simplest solar, and it works very well.Lead acid only. You cant mess it up.Also, the wiring in my unit is correct.
Many people complaint reverse polarity of the cables on the charge regulator but in fact it does NOT matter. The real culprit is the cable polarity of the solar panel.
Setting up my first solar cell and purchased the Potek 10-Amp/130Watt 12 Volt solar charge controller.
item works but is inaccurate on the display. I have verified with multimeter. Says to use 6 or 8awg wire from the battery to the controller but 8awg wire will not fit into the…
Controller works as advertised. Fast delivery. Very satisfied!
It Works fine
I purchased this for a design product, but there is a faulty connection that prevents the LCD screen from being used.
comments powered by DisqusAs was the case for others, mine arrived with its wires connected in a polarity-reversed way. A 10 minute fix, but still annoying that I needed to make the fix to a brand new,…