Tenergy T453 charger for 3.7V Lithium RC battery + 6pc 500mAh batteries for UDI818A/818A-1

Tenergy T453 charger for 3.7V Lithium RC battery + 6pc 500mAh batteries for UDI818A/818A-1
Tenergy T453 charger for 3.7V Lithium RC battery + 6pc 500mAh batteries for UDI818A/818A-1
Tenergy T453 charger for 3.7V Lithium RC battery + 6pc 500mAh batteries for UDI818A/818A-1
Tenergy T453 charger for 3.7V Lithium RC battery + 6pc 500mAh batteries for UDI818A/818A-1
Tenergy T453 charger for 3.7V Lithium RC battery + 6pc 500mAh batteries for UDI818A/818A-1
by people ...

Product Specifications

  • Tenergy T453 6-in-1 Intelligent Charger can charge up to 6 packs (3.7V Batteries) at the same time!
  • Charger will charge most Micro RC Helicopter & Airplane 3.7V 1S Batteries (Hubsan, Syma, UDI, WLToys quadcopter and helicopter batteries)
  • 6 converting cables included in charger for easy charging
  • Combo pack includes 6 pcs of 3.7V 500mAh 15C LiPO Batteries!
  • Batteries are exact replacement for UDI U818A, U818A-1 quadcopters, no modification necessary. – NOT COMPATIBLE WITH U818A WIFI DRONE, THIS DRONE USES A BATTERY WITH DIFFERENT PINS. –

    Product Description

Package comes with 1 x T453 6-Port LiPo Battery Charger 6 x 3.7V 500mAh 15C LiPO battery

Tenergy T453 6-Port LiPo Battery Charger for 3.7V (1S) Lithium RC Batteries 6-Port LiPo Battery Charger - Save time by charging 6 batteries at the same time Compatible with JST any Losi Battery Connectors - Works with most 1S batteries Micro RC Drone, Helicopter & Airplane. Individual LED Charging Status Indicator - Shows each battery’s status and tells you what is ready to use immediately.

Specifications Input: DC 5V Output: 500mA Per Channel (Max) Built-in Charging Port: 4 x Losi, 2 x JST Dimension: 50 x 35 x 13mm Weight: 13g Includes: 1 x T453 Charger, 1 x USB Cable, 2 x JST-to- Losi Converting Cable,4 x Losi-to- JST Converting Cable, 1 x User Manual Compatible with most Micro RC Helicopter & Airplane 1S Batteries: UDI U815, U816A, U818A; Wltoys V929, V949, V959; Syma X1, X4, X5C, X9; MJX T04, T05, F28, F29; Hubsan H111, H107L, H107C, H107C-HD, H107D and more

LED Status Red Lights on: currently charging Red Lights off: charging complete

6pcs of 3.7V 500mAh 15C LiPO Battery for UDI U818A/818A-1 2.4G 4CH RC Quad Copters This 3.7V 500mAh 15C LiPO battery is a replacement battery. It will give more PUNCH and ROBUST performance due to its higher current output and power. Direct replacement battery for UDI U818A/U818A-1, no modification is needed.

Features and Benefits Capacity: 500mAh Voltage: 3.7V Max. Discharge Current: 15C Single Battery Weight: 0.6 oz Battery Size (Max.): 57.0 x 18.5 x 7.8mm Retail package includes: 5 x Tenergy 3.7V 500mAh 15C LiPO rechargeable battery Direct replacement, no modification needed! *NOTE: battery not compatible with U818A WiFi FPV Model

Product Reviews

Owners of UDI U818A WiFi FPV RC Quadcopter Drone with HD Camera beware!

The jacks are not 100% compatible with UDI U818A WiFi FPV RC Quadcopter Drone with HD Camera.The thing is that original battery has 4-pin jack unlike these ones which have only 2-pin jacks. 2+2 is not always equals 4 so I had to cut sides of each 2-pin battery to insert in in the 4-pin socket.Another issue that drone has space only for 1 battery and it was tricky to insert 2 battery across each other.

A must for extending flying time for you quad that uses these – I use these on my a UDI 818a

This is a must should you have one of the quads that use the short flying time batteries. Charger actually works with 5 batteries at the same time although sometimes I experienced 1 led light not going on. I just switched the batteries around and all 5 stayed on. It still takes about 40 minutes to charge so don’t count on these as fast charge. For the price, you can’t beat extra flight time. One thing you may want to consider is letting the motors cool down a bit as they do get hot before loading up and flying again.

This is not for UDI U818A, you can’t connect …

This is not for UDI U818A, you can’t connect them to the UDI U818A, the connector is different, I repeat the connector is different.So far far I could not find one online. You need to build one.

Good Product, but Missing Pull Tabs

The battery and charger combo work fine. Being able to charge all of them at once is a time-saver. Even though they are aftermarket batteries they fit my UDI 818A HD+ drone just like the factory supplied ones. However they lack a pull tab. This tab make battery removal easy and also provides a mounting point for Velcro to keep the battery snugly in its compartment on rough landings. I made my own tabs using Aluminum foil tape made to wrap duct work. Problem solved.

These batteries perform exact as the “factory” batteries. Very satisfied.

These batteries perform exact as the “factory” batteries. The charger charges 2 batteries at the same time and does so in 20 or so minutes. I am completely satisfied. Some reviews speak to not holding charge as lone as the “factory” batteries and not getting a full charge. I’ve experienced NONE if these issues and can recommend these batteries and the charger/A week later, I am very satisfied with this and would buy again.

Wrong Connector…Not Compatible

NOT the same connector as original UDI U818A Quadcopter Drone battery. Original has 4 pin connector, this one has 2. Suggestion would be to provide better pictures and description of the products to ensure compatability. Very frustrating as a consumer to go through this unessearily.

the USB multi battery charger is doing good. The few extra minutes on the wall charger

I have only used the batteries one time and they seemed to work equally well as the battery that came with the quadcopter. In charging all 5 at the same time, off the USB port on the computer, the charge time was close to the wall charging of 1. When they were charged I put one at a time, on the wall charger to top them off. Between 5 and 10 minutes more of charging and they were done. So, the USB multi battery charger is doing good. The few extra minutes on the wall charger, probably wouldn’t be noticeable in flight duration.

Poor quality…..

Can’t speak about battery life yet, but my first impression was not great. The connection where the wire plugs into the charger is very loose……infuriatingly loose……all of them. So, when trying to charge all batteries at once, you have wiggle, jiggle, and adjust each one to get a good enough connection to light the LED indicator. You get one right and as a result, another one goes out. It can be done, but good luck charging all five at once. Extremely annoying.

Very convenient

This works great & is a huge convenience!

Not for the Force1 UDI U818A

Does not fit the Force1 UDI U818A as recommended.

Five Stars

Charger works great easy to use!!

Five Stars

Worked out good for me. Extra batteries mean longer fun.

Four of the batteries charged just fine. No overheating of the charger as mentioned in …

Four of the batteries charged just fine. No overheating of the charger as mentioned in some of the other reviews. However, one of the batteries appears to be bad.

Five Stars

great to do so many at once

Four Stars

Batteries are working good

… on my power packs at once and it’s really great I’m totally happy would recommend to

This unit is a real timesaver I can charge five on my power packs at once and it’s really great I’m totally happy would recommend to others

Not COMPATIBLE with Kolibri drone.

Received as part of bundle with Kolibri Drone and THEY ARE NOT COMPATIBLE. Will return. Hoping they will replace at no addtl fee.

Five Stars

Works as it should

Get it at Amazon

comments powered by Disqus
web analytics