Vibrelli Performance CO2 Inflator - Glueless Puncture Kit - Presta & Schrader Valve Compatible

by people ...

Precision Machined Aluminum Alloy: this CO2 Inflator weighs just 23 grams/0.8 ounces, it’s built to last
‘Easy-Airflow Valve’: control your PSI like a professional, inflates in seconds and gets you riding again quickly
Fits Presta & Schrader: This CO2 Bike Pump Requires No Valve Changing
Frost Guard: protect your hands from frost-burn with insulated CO2 Cartridge Sleeve and a Thumb-Guard
Includes Glueless Puncture Kit: Get up and running in munites; Note that a CO2 Canister is not included

Performance CO2 Inflator

This bike CO2 Inflator is the ideal lightweight bicycle pump for both competitive and social riders. With a unique ‘Easy Airflow Valve’, you can control your inflation speed and PSI with ease.

Fits Any Threaded CO2 Inflator Cartridge

Fit’s all threaded CO2 cartridge sizes: 16g, 20g and 25g. Note that CO2 Cartridges do NOT come supplied with this CO2 Inflator.

Frost Guard

Protect your hands from cold-burn with the insulated CO2 cartridge sleeve and Thumb-Guard.

Fits Presta and Schrader, No Valve Change Needed

This CO2 Tire Inflator attaches to both Presta and Schrader with a tight seal, even over 160 PSI.

Made to Last: 6061 Grade Aluminum

Vibrell’s Performance cycling CO2 Inflator is cast and machined from 6061 Aluminum Alloy, the stuff airplanes are made from.

Glueless Puncture Repair Kit Included

You’ll get a puncture when you least expect it, so be prepared. Get riding again in minutes with this Glueless Emergency Puncture Kit. Just patch, then inflate in seconds.

Product Reviews

A great addition to your saddle bag

Hey guys, back with another review, this time I am looking at the Co2 Inflator from Vibrelli. I think this is the perfect mix of size, ease of use and control. Fits great in my bag and it is really easy to fill your tire and still keep a hand on your tire to check the pressure. If you are out on the trail or the road and you get a flat you want the right tools to get back up and spinning quickly. This item should be in your saddle bag.

The valve was precise- it was easy to put just a tiny amount of CO2 in …

I had to use the inflator yesterday and it performed as promised. The valve was precise- it was easy to put just a tiny amount of CO2 in to inflate the naked tube to find the puncture. The cartridge sleeve did a good job of keeping the frozen cartridge from freezing my fingers. The tire I was patching was bigger than one cartridge could fill after using part of the load to find the puncture but changing the cartridge was easy. Two cartridges, the inflator and the patch kit make a small package which is easy to carry. All around, a great system. I would, however, recommend carrying a small bottle of soapy water to aid in finding the puncture.

Seems like a well built inflator

Seems like a well built inflator. Used it once and it worked great. When I went to use it again it wouldn’t inflate. The co2 was leaking out the top. Upon closer inspection It appears the piece that depresses the valve to allow the co2 to flow into the tire is broken and missing. This may be a manufacturing defect or poor design but unsure of which it may be. The device it’s self does appear to be well built. Review will be updated depending upon resolution

Highly recommended!

A really nice peace of engineering. Beautifully coated with some kind of shiny black material.Works like charm. I really love it.The reason for only 4 starts that the rubber cover what supposed to protect the valve while no CO2 cartridge is attached came off after only one day sitting in my saddle bag.I tried multiple other inflators and this is no question the best of any of them. I highly recommend it.

I’ve Got Gas!

I’ve not had the chance to use this product yet and hope the chance doesn’t come soon as it means I’ve had a tire puncture out on the road somewhere. However, the inflator is beautifully machined, light weight, and has a control valve thus which will allow me to control the rate of inflation. The included rubber sleeve for the canister helps prevent frost burn and the tube patches provide backup in case you’ve run out of canisters. If it works as advertised I will be very pleased but that is a wait and see.

Haven’t tried on tire yet but operates fine. Only concern is the valve knob

Haven’t tried on tire yet but operates fine. Only concern is the valve knob, seems easily moved so I found a plastic bottle to keep the unit in so it doesn’t accidentally go off in mmy kit.

Looks great - hope I never have to use it.

It looks like it should work fine, assuming there is enough pressure in a CO2 cartridge to depress the valve stem in a SCHRADER valve. There does not appear to be any mechanism to do that in the device. I hope I never have to use it. But it certainly looks well built. You can screw it onto a valve but what depresses the pin inside the stem?

Top Shelf Inflator

Nice design which slips easily into your repair kit. The addition of the neoprene sleeve for the CO2 bottle is a nice touch. I have had numerous inflators in the past that eventually pit and flake, but this one looks like it will last longer than the bike. Although I have not had to use it, knock on wood, the straight forward screw type design seems idiot proof.

Get a couple of co2 cartridges

I haven’t used it yet but is very very compact and I went online to see how to use it and it was simple

Product is very nicely made, you can tell that it is a …

Product is very nicely made, you can tell that it is a quality product from the look and feel. I have not been unlucky to use it since I haven’t needed to use it.