WALI Sbr201 universal fit for most TV and sound bar mount bracket. It fits most 32 to 70 inch TVs and VESA compliant: 200x100, 200x200, 300x300, 400x200, 400x400, 600x400mm product dimensions: 18(l) x 6.5(W) x 1 (H) inches. Takes only a few minutes to install, all the necessary hardware and installation instructions are included.
There is really no designated way that this meant to be used. It is very universal. I wanted it pretty snug between the sound bar and tv so the mount doesn’t show in the gap. I had to try a bunch of positions but after 10min of fiddling around I found the perfect method for my tv and sound bar. I used it with a 40in tv and a 28in sound bar. Definitely would recommend.
Easily mounted to my full swivel wall mount attached to the back of a 58” Panasonic. I docked 1 star because one of the two pieces was not perfectly flat but just slightly warped. As a result the sound at is not perfectly parallel to the TV, but nobody else would notice. Came with plenty of extra hardware.
These brackets seem pretty thin but once mounted they’re sturdy. The universal hardware worked on my Samsung tv and Samsung sound bar. Took about 10 min to install by myself. Would recommend.
Works great. Vizio soundbar, hisense 55 in. Mounted on top of tv. Came earlier than expected
Used to attach Samsung sound bar to Samsung TV. Had to mount at top and leave one screw loose on the bracket so it would fit the width of the mounting points on the soundbar. Used the bracket kit that came with the sound bar. I’m please with the result.
Awesome Sauce…Got a Vizio sound bar from Costco. Wanted to mount it under my tv. The soundbar brackets worked perfectly. Comes with lots of different hardware for mounting options. Took about 20 minutes to install. It’s 2 pieces of metal with some screws. Not much else to it.
The universal sound bar brackets work great. I used the brackets to mount my Samsung HW-HM45C sound bar Samsung HW-HM45C 290 Watt 2.1 Channel Sound Bar Manufacturer Refurbished to the TV & Wall mount to be mounted under the TV. The brackets come with multiple sets of hardware to mount various sound bars. The mounts are fairly thick solid metal as seen in the pictures.
These worked to hang the VIZIO 38” Sound Bar under my older 43” Samsung LED TV. I originally purchased the EchoGear Sound Bar Mount, but it wouldn’t work with the Kanto Full motion Mount and the ridge on the Samsung TV. So I got the Wali Universal Brackets.The VESA hole pattern on the TV is 8” apart, while the mounting holes on the Sound Bar are 31” apart.I had to use spacers to lift the mounting brackets for the sound bar and the Kanto wall mount so they would clear the ridge on the base of the TV.I placed the Wali brackets under the Kanto brackets on the lower holes on the TV (and put an extra washer to compensate on the top holes) and angled the brackets outwards in an inverted ‘V’ to reach the sound bar holes. They matched up fine and I could leave the recommended 1” gap between the TV and speaker. I was able to thread the bolts through the brackets’ end holes and didn’t have to use the long slots in the brackets. I did have to go to the hardware store and get four M8-35mm bolts to work correctly with the brackets, spacers and TV.Wali Brackets work fine to hang the bar speaker under the TV. With two caveats:1. The speaker will swing from side to side like a pendulum if pushed on either end or I move the wall mount tot he side. Easy to put back in place, but mildly annoying.2. The brackets are flexible because they are relatively thin and have no stiffener. So, the speaker will move backwards if pushed from the front. It returns when released. If you turn the TV on its mount, the speaker bounces a little back to front because the brackets act like a spring.This is totally because they are attached on top of spacers at only one screw point on the TV. (If you have the wider spaced VESA mounting holes on your TV you may be able to use two holes per side which will eliminate this.)The brackets are plenty strong. They are versatile and will work for most sizes and applications.All in all I’m pretty pleased with the brackets and the results. Good price.
It wasn’t long enough for a 55’. I had to use parts from external sources. And still the sound bar it’s very close to the tv edge.
This is a basic, easy to install and sturdy sound bar bracket. It’s fairly universal and should work without issue on any TV/Sound bar combo.
Great product, and fast shipping! Worked as advertised! Holds my Vizio soundbar on top of my TV perfectly! Highly recommend!
Does what it is supposed to do. A little wobbly but for the price I can’t complain too much.
Worked perfectly! Makes everything clean and works great with a TV on a tilt mount. I would highly recommend this product.
Good product. Perform exactly as I hoped.
I mounted my TV above my fireplace on a brick wall and didn’t want to drill anymore holes in the brick.
Works as advertised.
I purchased two sets of these to install a center channel and right and left speakers to give them a floating effect. They worked well.
comments powered by DisqusIt doesn’t come with all the best set of hardware so installing Sonos Playbar on it was tricky because the screws are thick sticking out of the bracket, but I made it work.